[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Inf-IT DAVcl] All day event considered as from midnight to midnight


Hi Matej,

Yes, it is what I understood of Ján's message. I am using version 0.9.0.

Regards,
Julien

On Fri, July 12, 2013 10:51, Matej Mihalik wrote:
> Hi all,
>
> There seems to be some kind of confusion as to what the problem is and
> we are talking about two different issues here :)
> 1. Julien is reffering to the fact that when you try to change a timed
> event to an all-day event, what actually happens is that you create a
> timed event thats starts at 00:00 of the start day, and end at 00:00 of
> the end day. That is a bug we identified some time ago, CalDavZAP
> incorrectly interpreted the all-day checkbox, thinking it wasnt ticked,
> even if it was, thus beeing unable to create a proper all-day event. The
> issue should be solved in the latest RC (0.9.1), however is still
> present on the demo site, which has the 0.9.0 version.
> 2. What Andrej is reffering to, is the interface behaviour when
> unticking the all-day checkbox. In the 0.9.0, when you untick the
> checkbox, the time values are auto-filled with 00:00 times, which can
> lead to some debatable (although logical) behaviour. We changed this in
> the 0.9.1 version, so the times for start and end date are auto-filled
> from the globalCalendarStartOfBusiness and globalCalendarEndOfBusiness
> config variables.
>
> My question therefore is, which CalDavZAP version are you using Julien?
>
> Matej Mihalik
>
> On 12-Jul-13 00:57, Ján Máté wrote:
>> Hi Marten & Julien,
>>
>> On Jul 11, 2013, at 10:17 PM, Marten Gajda <marten@xxxxxxxx
>> <mailto:marten@xxxxxxxx>> wrote:
>>
>>> just to be clear, if the events are all-day it should read as
>>> DTSTART;VALUE=DATE:20130718
>>> DTEND;VALUE=DATE:20130718
>>>
>>> the VALUE=DATE parameter is mandatory.
>>
>> yes, we use this parameter
>>
>>> Am 11.07.2013 18:52, schrieb Julien Métairie:
>>>> I think it should not set any hour/minute, for example :
>>>> BEGIN:VEVENT
>>>> SUMMARY:Test event
>>>> [...]
>>>> DTSTART:20130718
>>>> DTEND:20130718
>>>> END:VEVENT
>>>>
>>>> In this manner, the event would appear with no time at all, as shown
>>>> in attached screenshot. When creating a new event, it is a good idea
>>>> to pre-fill start/end times with business hours, but a "all-day"
>>>> event is valid all the day long (birthdays, holiday, ...).
>>
>> it is already fixed in the 0.9.1 rc1 ... and the start/end hours
>> (about which Andrej talked) are set when you uncheck the "All day"
>> checkbox (instead of 00:00, 00:00 in the next release we will use
>> values from globalCalendarStartOfBusiness
>> and globalCalendarEndOfBusiness settings).
>>
>>
>> JM
>
>



Follow-Ups:
Re: [Inf-IT DAVcl] All day event considered as from midnight to midnightMatej Mihalik <matej.mihalik@xxxxxxxxxx>